Call us toll free: 800-753-6889

Humminbird XAP-9-20 Angled Puck Transducer

MFG No: 710165-1
SKU No: RN08LDQIFG
UPC: 082324505782
MFG. Name: Humminbird
Available: 1
Condition: New

$56.50


Angled Puck Transducer

Inside Hull Transducers mount to the inside of most fiberglass boat hulls and transmit the sonar signal through the hull. On hulls with a deadrise less than 15 degrees, a flat bottom transducer should be used. For angles greater than 15 degrees, an angled transducer is recommended to assure the sonar signal travels downward.

Description: Single/Dual Puck Angled Transducer.
For Use With: Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


The Humminbird XAP 9 20 Angled Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise greater than 15 degrees, and transmit the sonar signal downward through the hull itself. Your boats hull must be of single-layer, fiberglass construction and be free of trapped air or voids in order for a puck transducer to operate correctly, so cored fiberglass, metal and wood will not work. This unit is meant to be glued to your inner hull with a slow-cure epoxy, which is included, and connects to your compatible Humminbird sonar or fish finder system via the included 15-foot cable.

Product Tags

Humminbird XAP-9-20 Angled Puck Transducer

No reviews yet.

Related Products