General Information
Manufacturer:Betco Corporation
Manufacturer Part Number:660B500
Manufacturer Website Address:http://www.betco.com
Brand Name:Betco
Product Name:Hybrid Floor Finish
Marketing Information:
Hybrid Floor Finish provides a long-lasting finish on all types of resilient tile flooring and properly prepared hard surfaces thanks to a revolutionary polymer system formulated with XBF technology. This self-sealing, extended-wear formula retains film integrity and outstanding gloss even after repeated detergent mopping and burnishing. It effectively reduces maintenance and prolongs the time between strippings. Specifically made for medium maintenance programs, this floor finish will retain its gloss between burnishings. In high-speed programs it greatly reduces the need to frequently use a restorer.
Packaged Quantity:1 Each
Product Type:Floor Finish
Product Information
Cleaner Volume:640 fl oz (20 quart)
Composition:
- Water
- Acrylic Polymer
- Ethoxydiglycol
- Tributoxyethyl Phosphate
- Glycol Ether
- Partially Fluorinated Alcohol
- Methylchloroisothiazolinone
- Methylisothiazolinone
- Wax
- Disodium 4,4'-bis(2-sulfostyryl)biphenyl, (E,Z)-
- Siloxane
pH:8.2 - 8.9
Recommended Use:
- Wax Remover
- Finish Remover
- Soil Remover
Directions/Instructions:Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE: Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
Application/Usage:
Features:
- Long Lasting
- Self-sealing
- Styrene-free
- Versatile
- Powder Resistant
