Similar to its ST counterparts the SC-SC MM jumpers are factory assembled and individually tested for flaws. They are manufactured with OFNR riser rated cable and come in duplex versions with 62.5/125 micron cables.
SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Conne

DeviceNet (M) to ST-Ng (F) Adapter

This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

-100% Factory Tested, 50 Micro Inch Gold-plated contacts-Low Profile boots for high-density applications-No width wasted on boot-Backward compatible with all lower rated category components-Constructed with Ultra Flexible, EZ release, Snag Free Strain relief-Stranded bare 24 AWG copper wire-Safety:

Wiring blocks are designed to support voice and high speed data applications. Offer a reliable and economical high density system with Category 5 performance.
- (1) 100 Pair 110 Block With Feet, (2) Label Holders, and (2) Destination Labels
- High density wall mounted cross connect system des

BZBGEAR SDI Cables are made using 75 ohm shielded coaxial cable with high-quality BNC connectors. They are designed to reliably support 3G-SDI cameras and equipment at resolutions up to 1080P over distances up to 100m. The cables feature a woven shield to help reject electromagnetic interference and

Classic single gang 4 port with ID.
- Ivory Single Gang 4 Port Station ID Keystone Wall Plate
- Rugged and durable construction
- Easy station identification with use of enclosed labels protected by clear plastic covers
- Hidden mounting screws
- Accommodates a wide variety of eas

The blank insert fills unused ports allowing for future upgrades. - 10pcs/bag
- Fills unused ports allowing for future upgrade
- Compatible with all IC107 faceplates, inserts, surface mount boxes, and blank patch panels
- Compatible with all ICC108 furniture faceplates, bezels, and surfac

- Cat5e 24 Port Patch Panel 6 Pack- Rack mounted CAT 5e component rated patch panel provides excellent performance for data networks requiring maximum speed and bandwidth- Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signals- Exceeds AN

Runway Inside Radius Section 12 Inches Wide Robust 16-gauge steel construction with a durable powder coated finish Configuration versatility adaptable to a wide a range of access run and cable delivery constraints Easy to install with attaching hardware included for all components Special tools j

Kit Ceiling Mount and Rod Robust 16-gauge steel construction with a durable powder coated finish Configuration versatility adaptable to a wide a range of access run and cable delivery constraints Easy to install with attaching hardware included for all components Special tools jigs and fixtures are

3FT CAT6 GETH CBL MOLDED RJ45 M BLUE

Designed from high quality galvanized steel for strength and durabilityAccommodates CAT 5e, CAT 6, CAT 6a, coax, fiber, and conduitRust resistant zinc finishComplies with TIA/EIA requirements for structured cabling systemsCost effective alternative to expensive cable tray or ladder rack runwaySmooth

USB4 40GBPS M/M USB-C 8K 60 HZ 100W PD C

- 24 Port EZ Blank Patch Panel 1 RMS- Rack mounted reinforced steel panel with pre-numbered ports- Flush mount design adds stability by allowing a rigid fit and a neat appearance- Designed to support the distribution of voice, data, audio, video and fiber optic applications- Ideal for use in high de

- Small-form-factor (SFF) connectors, increases density by 50 percent, 1.25-mm- Supports up to 24 fibers- ANSI/TIA-568-C.3 and TIA/EIA-604 FOCSI compliant- Built-in push and pull fasteners- Easy snap-in installation and removal- Fits LGX compatible patch panels and enclosures- Includes protective ca

- 12' length- Curly handset cord- Charcoal, matches black Panasonic BTS phones

CAT6A PATCH PANEL SHIELD 24PORT 10GBPS

Decorex Single Gang Faceplate * Residential or Commercial Use * Standard decorator style
Ivory Single Gang Decora Faceplate with Mounting ScrewsDesigned for all voice connectivity applicationsDesigned to support a multitude of high tech communication needs with contemporary styling for commercial

SC ceramic ferrule SM adapter panels are designed to fit all fiber optic blank patch panels rack and wall mount enclosures.
Fiber Optic Adapter Panel - 3 Duplex
Singlemode Fiber (SMF)
Designed to fit ICC's fiber optic blank patch panels (ICFORPP1RM), rack (ICFOR), and wall mount enclo

ST-Ng (M) to DeviceNet (F) Adapter

This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other will make networking Raymarine

- Designed with durable steel construction-Black powder coated-Supports up to 50 lbs. load capacity-Provides air flow to ventilate mounted equipment-Designed to fit standard 19" rack-Used with all ICCMS distribution and cable management racks-3 rack mount spaces (RMS)
- Designed with durable stee

StarTech.com SV831DUSBUK 8 Port 1U Rack Mount USB KVM Switch Kit with OSD and Cables
USB KVM SWITCH - 8 PORT KVM SWITCH - VGA KVM SWITCH -RACK MOUNT KVM

WLS CHRG 10W QI CERTIFIED