DDR4 8X1GBE/24X2.5 BAY/2X2200W PSU
2U 4 Nodes - Rear access
Motherboard
MZ62-HD0
CPU
AMD EPYC^TM 7002 series processor family
Dual processors, 7nm technology
Up to 64-core, 128 threads per processor
TDP up to 200W
NOTE:
1) If only 1 CPU is installed, some PCIe or memory functions might be unavailable
2) Contact GIGABYTE sales rep or technical support for more details about supporting cTDP 240W CPU
Compatible with AMD EPYC^TM 7001 series processor family
Socket
Per Node:
2 x LGA 4094
Total:
8 x LGA 4094
Socket SP3
Chipset
System on Chip
Memory
Per node:
16 x DIMM slots
Total:
64 x DIMM slots
DDR4 memory supported only
8-Channel memory per processor architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200 MHz
LAN
Per node:
2 x 1GbE LAN ports (1 x Intel I350-AM2)
1 x Dedicated management port
Total:
8 x 1GbE LAN ports (1 x Intel I350-AM2)
4 x Dedicated management ports
1 x 10/100/1000 CMC global management port
CMC: Chassis Management Controller, to monitor all status of computing nodes
Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp, DDR4 SDRAM
Management chip on CMC board:
Integrated in Aspeed AST2520A2-GP
Audio
-
Storage
Per node:
6 x 2.5" SAS/SATA hot-swappable HDD/SSD bays
Total: 24 x 2.5" hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
RAID
-
Peripheral Drives
-
Expansion Slots
Per node:
2 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus) from CPU_0
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth from CPU_0 (Type1, P1, P2, P3, P4 with NCSI supported)
2 x M.2 slots from CPU_0 and CPU_1:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 155W if using M.2 device
Total:
8 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus) from CPU_0
4 x OCP 2.0 mezzanine slots with PCIe Gen3 x16 bandwidth from CPU_0 (Type1, P1, P2, P3, P4 with NCSI supported)
8 x M.2 slots from CPU_0 and CPU_1:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 155W if using M.2 device
Internal I/O
Per node:
2 x M.2 slots
1 x COM header
1 x TPM header
1 x BMC SGPIO header
1 x JTAG BMC header
1 x PLD header
1 x Clear CMOS jumper
1 x IPMB connector
Front I/O
Per node:
1 x Power button with LED
1 x ID button with LED
1 x Status LED
1 x System reset button
Total:
4 x Power button with LED
4 x ID button with LED
4 x Status LED
4 x System reset button
1 x CMC status LED
Only one CMC status LED per system
Rear I/O
Per node:
2 x USB 3.0
1 x VGA
2 x RJ45 1 x RJ45 MLAN
Total:
8 x USB 3.0
4 x VGA
8 x RJ45
4 x RJ45 MLAN
1 x CMC global management port
Only one CMC global management port per system
Backplane I/O
24 x ports
Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply
2 x 2200W redundant PSUs
80 PLUS Platinum
AC Input:
- 100-127V-/ 14A, 47-63Hz
- 200-240V-/ 12.6A, 47-63Hz
DC Output:
- Max 1200W/ 100-127V-
+12.12V/ 95.6A
+12Vsb/ 3.5A
- Max 2200W/ 200-240V
+12.12V/ 178.1A
+12Vsb/ 3.5A
System power supply requires C19 type power cord
System Management
Aspeed AST2500 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Dashboard
JAVA Based Serial Over LAN
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup and Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings