Power Acoustik MOFO-122X MOFO-X Series Dual-Voice Coil Subwoofer (12 Inch, 2,700 Watts, Dual 2 Ohm)

MFG No: RA12090
SKU No: Q58Y02ZHMI
UPC: 709483032095
MFG. Name: POWER ACOUSTIK
Available: 9
Condition: New

$153.99

12r Woofer 2700W Max/1500W RMS - Dual 2 Ohm Voice Coils

2700 Watts Max
1500 Watts RMS
Dual 2 Ohm Voice coils
2.5r 4-Layer Coil on Aluminum Former
340 Oz. Strontium Ferrite Magnets (Dual Stacked)

Enclosure Specs:
Sealed 1.0 Cu. Ft.; Tuning Frequency: 54 Hz
Ported 2.0 Cu. Ft.; Tuning Frequency: 36.8 Hz; Port Size 4r x 12r
Mounting Depth: 6.875r
Weight: 26 lbs

Aluminum Voice Coil Heatsink Dust Cap with Reinforcing Fins
High Density Spruce Pulp Paper Cone with UV Protection
Low Frequency Optimized Motor Structure
12mm T-Yoke & Top Plate - Improves Low Frequency Dynamics & Reduces Voice Coil Heat Build-up
Non-Magnetic/Non-Resonating Die-Cast Aluminum Frame
4-Layer Voice Coil with Large Gauge Wire
Nickel Plated Spring Loaded 8ga. Compression Terminals
Large High Density Polyether Foam Surround with UV Protection
Dual Poly-Cotton Suspension - Dampens Violent Accelerations
High Temperature Adhesives

• 12";• 2,700W max ;• 1,500W RMS;• Blue, cast aluminum basket with diamond-cut accents;• Chrome back plate;• 2.5" dual 2ohm voice coils;• Overcompensating motor structure for increased magnetic strength;• 12mm T-yoke & top plate improve low-frequency dynamics;• Vented T-yoke & frame reduces voice-coil heat buildup;• Die-cast aluminum heat sink dust cap absorbs voice-coil heat;• Aluminum dust cap fins dissipate heat & strengthen cone;• Nonmagnetic nonresonant die-cast aluminum frame;• 2.5" 4-layer voice coil with large gauge wire increases power;• High-temperature-tolerant adhesives resist thermal failure;• Nickel-plated, 8-gauge, spring-loaded compression wire terminals;• Nontransfer spruce pulp cone & high-density polyether foam surround with UV & chemical protection;• Dual poly-cotton suspension dampens violent accelerations;• Stitched voice coil leads prevent potential damage;• Efficiency: 85.37dB @ 1W/1m;• Mounting depth: 6.875";• Motor volume: 373oz;• Optimum sealed enclosure: 1 cu ft;• Optimum ported enclosure: 2 cu ft;• Includes 1-piece gasket/trim ring with concealed mounting holes;