The Tripp Lite SmartOnline SU2200XLCD Tower UPS provides a reliable battery backup, while managing power and energy usage. Minimize downtime and protect your important data with this tower-style UPS. This Tripp Lite UPS is durable.
OUTPUT
Output Volt Amp Capacity (VA)
2200
Output kVA capacity (kVA)
2.2
Output Watt Capacity (watts)
1800
Output kW capacity
1.8
Output power factor
0.82
Output Capacity Details
ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120V 1800 watts, 115V 1620 watts, 110V 1530 watts, 100V 1440 watts). FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 1260 watts, 115V 1134 watts, 110V 1071 watts, 100V 1008 watts).
Crest Factor
3:1
Nominal Output Voltage(s) Supported
100V 110V 120V 127V
Nominal Voltage details
120V default
Frequency compatibility
50 / 60 Hz Supports 50 to 60 Hz and 60 to 50 Hz conversion
Frequency compatibility details
ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup Output matches input frequency when +/-5Hz of nominal Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency when input is 40 to 70Hz UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz of selected nominal.
Output voltage regulation (line mode)
+/- 2%
Output voltage regulation (Economy line mode)
+/- 10%
Output voltage regulation (Battery mode)
+/- 3%
Built-in UPS output receptacles
6 5-15/20R outlet(s) 1 L5-20R outlet(s)
Built-in controllable switched load banks
Two switchable three-outlet load banks
Output AC waveform (AC mode)
Pure Sine wave
Output AC waveform
Pure Sine wave INPUT
Rated input current (at maximum load)
16A
Nominal Input Voltage(s) Supported
100V AC 110V AC 120V AC 127V AC
Nominal input voltage description
120V factory default
UPS input connection type
5-20P
Input circuit breaker
30A
UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical Service
15A 120V
BATTERY
Full load runtime (minutes)
4.5 min. (1800w)
Half load runtime (minutes)
13 min. (900w)
Expandable battery runtime
Extended runtime supported via optional external battery packs
External battery pack compatibility
BP48V24-2U (limit 1) BP48V60RT-3U (multi-pack compatible)
Expandable runtime description
External battery configurations require the use of Tripp Lites
External Battery Configuration Software, see manual for details
DC system voltage (VDC)
48Battery recharge rate (included batteries)
Less than 3 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement)
RBC48-SUTWR
Battery Access
Battery access door
Battery replacement description
Hot-swappable, user replaceable batteries
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
570
UPS AC suppression response time
Instantaneous
UPS Dataline suppression
1 line TEL/DSL (1 in / 1 out) 10/100Base T Ethernet
EMI / RFI AC noise suppression
Yes
PHYSICAL
Installation form factors supported with included accessories
Tower
Primary form factor
Tower
UPS housing material
Steel
Cooling method
Fan
COMMUNICATIONS
Communications interface
USB (HID enabled) DB9 Serial Contact closure EPO (emergency power off) Slot for SNMP/Web interface
Network monitoring port description
Supports detailed monitoring of UPS and site power conditions DB9 port supports RS232 and contact closure communications
PowerAlert software
Included
Communications cable
USB and DB9 cabling included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
Zero transfer time (0 ms.) in online, double-conversion and frequency regulation / conversion modes
Low voltage transfer to battery power (setpoint)
55V (33% load), 70V (70% load), 100V (100% load)
High voltage transfer to battery power (setpoint)
150
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category A (EMI) Weight
58.20
Item Dimension
15.2 x 13 x 24
Warranty Information
2-year limited warranty