General Information

---

Manufacturer:Velcro Companies
Manufacturer Part Number:90083
Manufacturer Website Address:http://www.velcro.com
Brand Name:VELCRO®
Product Line:Sticky Back
Product Name:Sticky Back 15ft x 3/4in Roll Beige
Marketing Information:

VELCRO Brand Sticky Back hook and loop fasteners deliver strong holding power. Simple peel and stick application. For smooth surfaces such as painted wallboard, glass, metal and most plastics, can be used for indoor or outdoor applications. VELCRO Brand is the original hook and loop fastener. Much better durability and strength than other off brand fasteners. They are available in squares, coins, strips, and tapes and come in a range of different sizes and colors. A must have for any home, school or office. Great for organization, mounting, hanging, and securing. Instructions: 1. Clean and dry surface before application. 2. Peel tape from fastener and press firmly into place. 3. Adhesive reaches maximum strength after 24 hours. Note: Not recommended for fabrics, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener.

Packaged Quantity:1 Roll
Product Type:Sticky Tape

Product Information

---

Tape Width:0.75"
Tape Length:15 ft
Tape Strength:5lb
Dispenser Included:Yes
Application/Usage:

• Multipurpose
• Wall
• Home
• School
• Mounting

Features:

• Long Lasting
• Durable
• Peel & Stick
• Peel-off
• Hook & Loop Fastener

Physical Characteristics

---

Color Family:Beige
Product Color:Beige

Miscellaneous

---

Additional Information:

Shape: Roll

Care and Application:

Instructions:

• Clean and dry surface before application.
• Peel tape from fastener and press firmly into place.
• Adhesive reaches maximum strength after 24 hours.

Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.

Removal Instructions:

• Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
• Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
• Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
• Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
• Stick the ball on the adhesive which is on your substrate and pull it off
• Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
• If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 5 lbs

Functional Temperature Range:

0-100° F (-18-38° C)

Recycled:No
Assembly Required:No
Country of Origin:Mexico

See reviews