NMEA2000 Micro Cable Assembly - 1M

This 1-meter micro cable assembly is designed for use within NMEA 2000 networks. It can serve as a drop cable from a backbone or extend the backbone cable, ensuring flexibility in your marine networking setup.

Constructed with UL-certified materials, this cable assembly guarantees reliable installation. It consists of five wires within a single waterproof cable: power, ground, two data wires, and a drain wire for shielding that protects against external radio interference.

The cable can form a backbone up to 100 meters in length with the option to extend it using mini cables for longer distances. Each drop cable should not exceed 6 meters, and the overall drop length must not surpass 72 meters to maintain network efficiency.

Actisense has meticulously designed these cables utilizing specialized NMEA knowledge for optimal performance.

• Rated Current: 3A
• Rated Voltage: 60VDC
• Male Contact: Brass, gold-plated
• Female Contact: Phosphor bronze, gold plated
• Contact Carrier: PBT, black
• Standard M12 “A” polarization
• Mating Thread: M12
• Screw Cap: Brass, nickel plated
• O-Ring Seal: Rubber, black
• Housing: PVC, black
• Power Pair: 22 AWG (19-strand tinned copper)
• Data Pair: 24 AWG (19-strand tinned copper)
• Drain: 22 AWG (19-strand tinned copper)
• Braid: 37 AWG (tinned copper)
• Jacket Material: 0.8mm Nom. PVC, black
• Jacket Outer Diameter: 6.85mm ±0.254mm
• Weight: 105g
• Protection: IP67 (when mated)
• Operating Temperature: -20°C to +70°C
• Storage Temperature: -40°C to +85°C

Product Tags

NMEA2000 Micro Cable Assembly - 1M